Wire rod is a rolled alloy or nonalloy steel product, produced from a semi (e.g. bloom) and having a round, rectangular or other cross-section. Particularly fine cross-sections may be achieved by subsequent cold forming (drawing). Wire rod is wound into coils and transported in this form.
Dimension:
Dia. Outer Dia. Inner Dia. 5.5-16 mm 1250 mm 850 mm
Specification:
No Grade Standard 1 RSt34-2 DIN 2393-2 2 SG2 DIN 8559-1 3 SWRY11 JIS G 3503 4 S2 EN 756 5 RSD10Si DIN 17145 6 10MnSi5 DIN 17145 7 11Mn4Al DIN 17145 8 11MnMo45 DIN 17145 9 QS77Mn YB T4264 10 QS82Mn YB T4264 11 QS87Mn YB T4264 12 QS92Mn YB T4264
WIRE ROD – AISI / SAE GRADE
SPECIFICATION C % AISI / SAE 1005 0.06 max AISI / SAE 1006 0.08 max AISI / SAE 1008 0.06 – 0.08 AISI / SAE 1010 0.08 – 0.13 AISI / SAE 1012 0.10 – 0.15 AISI / SAE 1015* 0.13 – 0.18 AISI / SAE 1018 0.15 – 0.20 AISI / SAE 1020 0.18 – 0.23 AISI / SAE 1021 0.18 – 0.23 AISI / SAE 1022 0.18 – 0.23 AISI / SAE 1030 0.28 – 0.34 AISI / SAE 1038 0.35 – 0.42 AISI / SAE 1040 0.40 – 0.43 AISI / SAE 1045 0.45 – 0.50 AISI / SAE 1065 0.64 – 0.69 AISI / SAE 1070 0.67 – 0.72
Grade No C Mn P S 1006 0.08 Max 0.25-0.40 0.040 Max 0.050 Max 1008 0.10 Max 0.30-0.50 0.040 Max 0.050 Max 1010 0.18-0.13 0.30-0.60 0.040 Max 0.050 Max 1012 0.10-0.15 0.30-0.60 0.040 Max 0.050 Max 1015 0.13-0.18 0.30-0.60 0.040 Max 0.050 Max 1017 0.15-0.20 0.30-0.60 0.040 Max 0.050 Max 1018 0.15-0.20 0.30-0.60 0.040 Max 0.050 Max
Applications:
fasteners, bolts, rivets, screws general purpose wires electrode wires, industrial wires, agriculture wires, bush wires, chain rivet wires detonator wire Umbrella ribs, upholstery wires, cycle spokes, needle wires, heald wires, staple pin Wire, safety pin wires ACSR wires, earth wires Tyre and hose reinforcement wires, Prestressed concrete wire, springs and rope wires card clothing wires vineyard wires ball bearing quality Automobile parts like screw, fasteners, bush, spline, socket, connecting rod, shaft, gear, rivets, engine shaft, connecting rod, spindles, gears, etc.